ABRITES - AVDI - MN032 & MN034 - Mercedes - Combination For FBS4/DAS4

This is a combination of both MN032 and MN034. This includes the MN032 which is a world leader in terms of Mercedes-Benz vehicles module replacement, key and remote programming, both for new and used control units for all vehicles up to, and including FBS3 generation. And the MN034, which is the FB34 Personalization Expert license allows easy personalization of ALL virgin modules from the FBS4 generation of Mercedes DAS (Drive Authorization System). Personalization expert practically has no limitations in its coverage! It was designed to work with and build on the MN032

MN032 Entails:

MN032 Supported Models:

• W202/W208/W210
• W203/W209/W211/W219
• W169/W245
• W220/W215/R230
• W204/W207/W212/W218
• W221/W216/W251/W164/X164
• W176/W246/W242/W117
• W166/X166

MN032 Module replacement

• Service password reading
• Read/Save/Update FBS Data
• Transfer FBS Data to a replacement unit
• Make each DAS/FBS module virgin, personalise and activate it
• Read/Save/Update Coding (the only way to avoid online SCN coding)
• Transfer Coding to a replacement unit

MN032 Supported Modules are all DAS related modules

• ECUs
• TCUs (7G-Tronic)
• ISM
• DSM
• ESL/EZS
• EIS/ELV

MN032 Key programming:

• Easily extract the EZS/EIS key password
• Program all types of DAS2 keys
• Program Infra Red keys to DAS3 (FBS3)
• Enable and disable key positions

MN032 Other Features:

• Program the Abrites Emulators for Mercedes vehicles (EM001, EM004, EM005, EM008, EM009, EM012, EM014)
• Reset the mileage of any supported EZS/EIS.

MN032 FBS4 cars

• Reset of FBS4 Engine control units to virgin state
• Read the personalization data from a FBS4 ECU and saving it to a file for future use
• Program personalization data from a previously saved file to a FBS4 ECU
• FBS4 ECU Activation

MN032 Currently supported ECUs (produced until MY2020):

• CR40 (EDC17C43)
• CR41 (EDC17C66)
• CR42 (EDC17CP46)
• CR43 (EDC17CP60)
• CR6 (EDC17CP10)
• CR60 (EDC17CP46)
• CR61 (EDC17CP57)
• MED40 (MED17.7.1 and MED17.7.2)
• MED177 (MED17.7.3, MED17.7.5, MED17.7.8)
• CRD3
• CRD3H
• CRD3S2

MN032 Additional and required tools:

• ZN051 Abrites Distribution Box
• ZN002 Abrites PROTAG programmer
• ZN030 Abrites ABPROG
• Abrites IR keys, keys with replica shells and Abrites IR PCBs: TA13, TA14, TA15, TA21, TA22, TA52

MN034 features:

• There are no exceptions in the production range of control modules. No more troubles and restrictions caused by production year changes and manufacturer limitations. MRD1, MRG1, CRR2, EMS74, VGS4NAG2, VGSNAG3, DSM, Electric Motors, Hybrid Motors, etc. all by internal CAN bus.
• Our personalization expert eliminates the problem when the old control unit is missing!
• Personalization expert generates special FBS4 data and uses it to complete the personalization process.
• In its current, first iteration MN034 allows personalization of MED177, MED1775, MED40, CR40, CR41, CR42, CR43, CR60LS, and CR61 ECUs via OBDII when NO PREVIOUS PERSONALIZATION DATA IS AVAILABLE!
• The list of supported control modules for personalization when the old module is missing will be updated continuously as we progress.

• Currently, MN032 and MN034 have partial restrictions for W223/W206-based models. This is still MN034’s first version. Our coverage will be extended for these models after we release an additional communication adapter for AVDI.

An AVDI and active AMS are required to purchase and use this product.

ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!